Wi-Fi or Bluetooth Not Working After iOS Update? Repair Solutions You Must Know

Updating your iPhone or iPad to the latest iOS version should ideally improve performance, enhance security, and add new features. However, many users suddenly experience Wi-Fi or Bluetooth not working after iOS update, leading to connection drops, pairing failures, unstable networks, or completely missing signals. Although these issues may feel frustrating, they are more common than you think.

Fortunately, there are reliable methods to fix Wi-Fi or Bluetooth not working after iOS update, whether the problem comes from software glitches, corrupted settings, incompatible devices, or deeper hardware-level failures. This complete guide walks you through the causes, troubleshooting steps, advanced repair methods, and when to seek professional help—so you can restore your device’s connectivity quickly and effectively.

Why Wi-Fi or Bluetooth Not Working After iOS Update Happens

Many users notice that immediately after installing a new iOS version, Wi-Fi or Bluetooth stops working, becomes unstable, or disconnects frequently. Understanding why this happens is the first step toward solving the issue.

1. Software Bugs After iOS Release

New iOS versions sometimes introduce temporary bugs that directly affect connectivity modules. As a result, Wi-Fi or Bluetooth may malfunction unexpectedly.

2. Corrupted Network Settings

During the update process, system configuration files may fail to load or sync properly. Consequently, your device may not connect to networks or Bluetooth accessories.

3. Interference With Hardware Drivers

iOS updates also modify communication drivers. Therefore, older iPhones or accessories may struggle to pair or connect.

4. Incomplete iOS Installation

If the update was interrupted, your Wi-Fi or Bluetooth may stop functioning entirely.

5. Hardware Damage Coinciding With the Update

Sometimes, a faulty antenna, moisture exposure, or physical impact becomes noticeable only after the software update.

Quick Checks Before Troubleshooting Wi-Fi or Bluetooth not working after iOS update Issues

Before jumping into advanced steps, always try these quick checks when facing Wi-Fi or Bluetooth not working after iOS update:

• Ensure Airplane Mode is OFF
• Restart your iPhone or iPad
• Make sure the router or accessory works
• Update all apps
• Check for a minor iOS patch (Apple often releases quick bug-fix updates)

Once you complete these basic checks, you can move on to targeted solutions.

Fixing Wi-Fi Not Working After iOS Update (Step-by-Step Solutions)

Below are the best repair methods for resolving Wi-Fi not working after iOS update problems.

1. Restart Your Router and Device

Although it seems simple, it’s highly effective. Restarting both devices clears memory issues and resets network handshake processes.

2. “Forget This Network” and Reconnect

Sometimes, your device keeps old network data that contradicts new iOS files.

Steps:

1. Go to Settings → Wi-Fi
2. Tap on your network
3. Select Forget This Network
4. Reconnect and re-enter the password

3. Reset Network Settings (Most Effective for Wi-Fi Repair)

This solution restores all network configurations to default.

Steps:
Settings → General → Transfer or Reset iPhone → Reset → Reset Network Settings

This often resolves persistent Wi-Fi not working after iOS update issues instantly.

4. Turn Off Wi-Fi Assist for Wi-Fi or Bluetooth not working after iOS update

Wi-Fi Assist switches to mobile data when the Wi-Fi signal is weak. After updates, it may get stuck.

Steps:
Settings → Cellular → Wi-Fi Assist → Turn Off

5. Disable VPN or Proxy

VPN apps sometimes interfere with Wi-Fi after an iOS update.

If you use a VPN:
Turn it OFF and check connectivity again.

6. Update to the Latest iOS Patch

Apple releases quick fixes for connectivity problems.

Go to:
Settings → General → Software Update

If an update is available, install it immediately.

7. Reset All Settings for Wi-Fi or Bluetooth not working after iOS update

If nothing else works, try this.

Settings → General → Reset → Reset All Settings

This does not erase personal data.

Fixing Bluetooth Not Working After iOS Update (Effective Methods)

Bluetooth failures are also common after major upgrades. Here’s how to fix Bluetooth not working after iOS update.

1. Remove and Re-Pair Your Bluetooth Device

Old pairing data may conflict with updated iOS settings.

Steps:
Settings → Bluetooth → Tap “i” → Forget This Device → Reconnect.

2. Turn Off Bluetooth and Restart

This resets the Bluetooth module.

3. Disable Low Power Mode

iPhones sometimes restrict Bluetooth activities when battery-saving features are triggered.

Steps:
Settings → Battery → Turn Off Low Power Mode.

4. Reset Network Settings

Bluetooth settings are included in network profiles, so this works for many users.

5. Check for Accessory Firmware Updates

AirPods, speakers, smartwatches, and car stereos often need firmware updates to sync with new iOS versions.

6. Try a Different Accessory

This helps determine whether the issue lies in your iPhone or the Bluetooth device.

Advanced Fixes for Wi-Fi or Bluetooth Not Working After iOS Update

If all basic methods fail, you may be dealing with a deeper system or hardware-level problem.

1. Restore iOS Using iTunes or Finder (Full Reinstallation)

A fresh installation replaces corrupted update files.

Steps:

1. Connect your device to a computer
2. Open iTunes/Finder
3. Select Restore
4. Reinstall iOS completely

This often resolves major connectivity issues.

2. DFU Mode Restore (Deep System Repair)

DFU mode reloads firmware from scratch. It is the strongest software fix for Wi-Fi or Bluetooth not working after iOS update.

3. Hardware Diagnosis

If problems persist even after restoring iOS, you may have:

• Wi-Fi antenna damage
• Bluetooth IC failure
• Motherboard damage
• Loose or broken RF connectors
• Moisture-related issues

In such cases, professional help is essential.

When to Seek Professional Repair for Wi-Fi or Bluetooth not working after iOS update Problems

If you notice any of the following, do not try random fixes—seek help immediately:

• Wi-Fi is permanently greyed out
• Bluetooth won’t turn ON
• Connections drop constantly
• AirDrop is not functioning
• No networks appear on the list
• Device heats up while connecting
• Bluetooth accessories disconnect repeatedly

These signs indicate hardware failure beyond regular troubleshooting.

You can visit Milaaj Mobiles and Laptop Repair Al Barsha, a trusted repair center specializing in advanced iPhone and iPad connectivity repairs. Moreover, their experts use micro-soldering tools, antenna testing equipment, and detailed diagnostics to restore Wi-Fi and Bluetooth functionality safely and efficiently. As a result, your device receives precise, reliable repairs that address both software and hardware issues effectively.

Preventing Wi-Fi or Bluetooth Issues After Future iOS Updates

Although software bugs are unpredictable, you can minimize the chances of facing these issues again.

Update apps before updating iOS

Keep at least 20% storage free

Avoid beta versions unless necessary

Reboot your device after every update

Use original chargers to prevent hardware stress

Following these steps helps maintain stable connectivity and prevents update-related glitches.

FAQs About Wi-Fi or Bluetooth not working after iOS update

Q1: Why is my iPhone Wi-Fi not working after an iOS update?
It may be due to software bugs, corrupted settings, or network conflicts caused by the new update.

Q2: How do I fix Bluetooth not connecting after updating iOS?
Try forgetting the device, resetting network settings, or updating to the latest iOS patch.

Q3: Will resetting network settings fix iOS update Wi-Fi issues?
Yes, it often resolves configuration conflicts caused during the update.

Q4: Can an iOS update damage Wi-Fi or Bluetooth hardware?
No, but it can reveal pre-existing antenna or IC problems.

Q5: When should I seek professional repair?
If Wi-Fi is greyed out, Bluetooth won’t turn on, or both fail consistently after troubleshooting.

Conclusion: Wi-Fi or Bluetooth not working after iOS update

Experiencing Wi-Fi or Bluetooth not working after iOS update can be frustrating; however, the problem is usually solvable once you follow the right steps. From there, simple solutions like restarting the device, resetting network settings, or reinstalling the update often fix the issue quickly. Moreover, most users can restore normal connectivity at home without needing advanced tools.

Even so, if the problem relates to the internal antenna, Bluetooth IC, or other board-level components, then seeking professional repair becomes the safest and most effective option. Ultimately, with proper troubleshooting—or expert assistance when needed—your iPhone or iPad can regain strong, stable, and reliable Wi-Fi and Bluetooth performance after any iOS update.

Other Services:

• Need other iPhone repairs? Check out Milaaj’s iPhone repair services in Dubai.
• Looking to upgrade? Learn about selling your used iPhone in Dubai.
• Data loss concerns? Visit Milaaj’s data recovery services.
• For Apple users, check Apple trade-in options in Dubai.

📍 Visit Any Milaaj Branch in Dubai

Shop Locations: Al Barsha | Bur Dubai | Reef Mall, Salah Al Din | Al Nuaimiya, Ajman
Email: support@milaaj.com
Operating Hours: Monday – Sunday