Upgrading RAM and Storage on ASUS ROG Laptops: A Step-by-Step Guide

Enhancing your ASUS ROG laptop’s performance is achievable by upgrading its RAM and storage. Whether you’re a gamer, content creator, or power user, this guide provides detailed steps to help you through the ASUS ROG RAM and storage upgrade process.

---

1. Understanding Your ASUS ROG Laptop’s Upgrade Potential

Before proceeding, it’s crucial to determine your laptop’s upgrade capabilities:

1. RAM: Most ASUS ROG laptops feature two RAM slots, supporting up to 64GB of DDR4 or DDR5 SODIMM RAM, depending on the model. However, some models, like the Zephyrus G14, have soldered RAM, making upgrades impossible.
2. Storage: Many ROG laptops come with one or two M.2 SSD slots. For instance, the Strix series often includes dual M.2 slots, allowing for storage expansion without replacing the existing drive.

---

2. Preparing for the Upgrade

Tools and Materials Needed:

1. Compatible DDR4 or DDR5 SODIMM RAM modules
2. M.2 NVMe SSD (2280 form factor)
3. Phillips #0 screwdriver
4. Plastic spudger
5. Anti-static wrist strap
6. Thermal pads (if required)

Safety Precautions:

1. Power Down: Completely shut down your laptop and unplug it from any power source.
2. Discharge Static: Use an anti-static wrist strap to prevent electrostatic discharge.
3. Battery: If possible, remove the battery or ensure it’s below 25% charge to minimize risks.

---

3. Asus ROG RAM Upgrade

Step-by-Step Instructions:

1. Access the RAM Slots:
   1. Place the laptop upside down on a soft surface.
   2. Remove the screws securing the bottom panel.
   3. Gently pry open the panel using a plastic spudger.
2. Install New RAM Modules:
   1. Locate the RAM slots.
   2. If replacing existing modules, release the clips and remove them.
   3. Align the new RAM module with the slot and insert it at a 45-degree angle.
   4. Press down until it clicks into place.
3. Reassemble and Test:
   1. Reattach the bottom panel and secure it with screws.
   2. Power on the laptop and enter the BIOS (usually by pressing F2 during startup) to verify the new RAM is recognized.

---

4. Upgrading the Storage

Step-by-Step Instructions:

1. Access the SSD Slot:
   1. With the bottom panel removed, locate the M.2 SSD slot.
   2. If a thermal shield is present, carefully remove it.
2. Install the New SSD:
   1. Insert the SSD into the slot at a slight angle.
   2. Press it down and secure it with the mounting screw.
   3. Reattach any thermal shields if necessary.
3. Reassemble and Configure:
   1. Reattach the bottom panel and secure it with screws.
   2. Power on the laptop.
   3. If the SSD is additional storage, initialize and format it via Disk Management.
   4. If it’s a replacement, install the operating system using ASUS Cloud Recovery or a bootable USB drive.

---

5. Post-Upgrade Verification

1. BIOS Check: Ensure the BIOS recognizes the new RAM and SSD.
2. Operating System: Confirm that the operating system detects the new hardware.
3. Performance Testing: Use benchmarking tools to assess performance improvements.

---

6. When to Seek Professional Assistance

If you’re uncomfortable performing these upgrades or encounter issues, consider professional services. Milaaj Mobiles and Laptop Repair Al Barsha offers expert assistance with:

1. RAM and SSD upgrades
2. BIOS configuration
3. Data migration
4. Hardware diagnostics

Contact Information:

Location: Al Barsha | Bur Dubai.
Email: support@milaaj.com
Phone: +971 52 524 4884
Operating Hours: Monday – Sunday

Book a Repair Today: Click here